|Mould and Form Oils||SAE / ISO VG||TDS|
|Crystal Mould Oil EDZ||Best result 1L for 40-60m²|
|Crystal Mould Oil OBR||Concrete mould oil|
|Crystal Mould Oil TWD Plus||Concrete mould oil|
Crystal Mould Oil EDZ Apply thin layer 1 litre at 40-60 m² for best results, also this mould oil can also be used for the manufacturing of concrete in heated moulds. This mould oil is recommended for steel and coated wooden moulds and should be applied, by spraying, swabbing or brushing. Crystal Mould Oil OBRUsual mixture proportion of this mould oil is 1 to 9 parts of water, It is important that the oil is added into the water and not the water into the oil, shelf life 9 month maximum. This mould oil is an emulsifying concrete mould oil for the conrete industry and the construction of houses, buildings, subways and bridges. Crystal Mould Oil TWD Plus For coated wooden moulds: use 1 litre of this mould oil at 30-40 m² For steel moulds: use 1 litre of this mould oil at 40-50 m² This is a light coloured concrete mould oil for the construction of houses, buildings, subways and bridges. Crystal’s series of form oils are high-quality moulding oils used as form release agents and rust-preventive coatings. They are recommended for steel and coated moulds, can be applied by spraying, swabbing or brushing and can also be used for the manufacture of concrete in heated moulds. Crystal Form Oils are based on high-quality mineral virgin base oil in combination with special additives to ensure good release characteristics, no discolouring of the concrete surface, good protection against deposits, high protection against rust in steel moulds under normal conditions, preventing against put-forming in the concrete surface. Improved mould oils performance and higher efficiency at work.